What would you like to understand?

Popular destinationsCalculatorsCoursesPracticeFormulas

Unlock Premium Help

Explore every tutor and study workspace for seven days, with no daily AI cap during the trial.

Choose a billing period
Ask a parent to pay

Nothing is charged during the first seven days. Unless you cancel, the plan you selected begins when the trial ends and renews on its stated schedule. Manage cancellation from your plan page. Stripe handles the payment details.

Joint Variation Calculator

Find or apply k in a relationship where y varies jointly with x and z.

Set up the relationship

Joint Variation inputs

Enter only the values that define this relationship. The result is checked against the original setup.

Joint-variation resultEnter the known values

The method, result, and an independent check will appear here.

Method for this result

  1. Complete the inputs and calculate.

Constant-ratio check

  1. The check will use a different relationship or reverse operation where possible.

The relationship behind Joint Variation Calculator

z = k x y combined: z = k x / y with a power: z = k x y²

Symbols and inputs for Joint Variation Calculator

Symbols and inputs for Joint Variation Calculator
SymbolQuantityMeaning
zThe quantity being predictedIn the beam example below, a safe load measured in pounds.
x, yThe quantities it varies withMultiplied together for joint variation. Each keeps its own unit.
kThe constant of variationFound from one full set of measurements. Its unit is whatever makes both sides match.
the denominatorThe inverse partAny quantity the answer shrinks with sits underneath, as length does for a beam.

Worked example for Joint Variation Calculator

  1. z varies jointly as x and y, and z = 36 when x = 3 and y = 2: 36 = k × 3 × 2
  2. Multiply the two knowns: 3 × 2 = 6
  3. Divide to find k: k = 36 ÷ 6 = 6
  4. Write the rule: z = 6xy
  5. Find z when x = 5 and y = 4: z = 6 × 5 × 4 = 120
  6. Work backwards: find y when z = 90 and x = 3: 90 = 6 × 3 × y, so 90 = 18y
  7. Divide: y = 90 ÷ 18 = 5

A second case for Joint Variation Calculator

  1. A different case: one quantity is on the bottom: the safe load L of a beam varies jointly as its width w and the square of its depth d, and inversely as its length L₀
  2. Write the shape: L = k w d² / L₀
  3. A 3 in wide, 6 in deep, 12 ft beam holds 900 lb: 900 = k × 3 × 36 / 12
  4. Tidy the right side: 3 × 36 = 108, and 108 ÷ 12 = 9, so 900 = 9k
  5. Solve for k: k = 900 ÷ 9 = 100
  6. Now a 4 in wide, 8 in deep, 16 ft beam: L = 100 × 4 × 64 / 16 = 25600 ÷ 16 = 1600 lb
  7. Watch the squared depth: keeping w and L₀ but doubling d to 16 gives 100 × 4 × 256 / 16 = 6400 lb, four times as much, not twice

Turning variation wording into an equation

Turning variation wording into an equation
How the question is wordedEquationHow k is foundWorked example
y varies directly as xy = kxk = y / xy = 3.75x
y varies inversely as xy = k / xk = xyy = 36 / x
z varies jointly as x and yz = kxyk = z / (xy)z = 6xy
z varies directly as x and inversely as yz = kx / yk = zy / xz = 8x / y
z varies jointly as x and the square of yz = kxy²k = z / (xy²)z = 2xy²
L varies jointly as w and d², inversely as L₀L = kwd² / L₀k = L·L₀ / (wd²)L = 100wd² / L₀

Mistakes to catch with Joint Variation Calculator

'z varies jointly as x and y' written as z = k(x + y)

The word jointly always means multiplied. Adding would make z = k(3 + 2) = 5k, and k would come out 7.2 instead of 6.

Repair: Write z = kxy, so 36 = k(3)(2) and k = 6.

Finding k as 36 ÷ (3 + 2) = 7.2

The two quantities were added before dividing, which is the same error one step later.

Repair: Multiply first: 36 ÷ (3 × 2) = 36 ÷ 6 = 6.

In L = kwd²/L₀, doubling d doubles the safe load

d is squared, so doubling it multiplies the load by 2² = 4.

Repair: Check it: 1600 lb becomes 6400 lb, not 3200 lb.

Questions about Joint Variation Calculator

What is the difference between joint variation and combined variation?

Joint variation only multiplies: z = kxy. Combined variation mixes multiplying and dividing, so at least one quantity sits underneath, as in z = kx/y. Most real formulas from science are the combined kind.

Do I need two sets of measurements to find k?

No, one complete set is enough. That is the whole point of k being constant: once 36 = k(3)(2) has fixed it at 6, every other combination of x and y follows from z = 6xy with no further data.

What unit does k have?

Whatever makes both sides agree. In the beam example L is in pounds, w and d are in inches and L₀ is in feet, so k carries pound-feet per inch-cubed. If you change any unit, k changes with it.

How do I handle 'varies jointly as x and the square of y'?

Square the y before you do anything else. k = z ÷ (x y²), not z ÷ (xy). Getting this wrong is easy to spot later: your predicted values will be off by a factor of y, which grows as the numbers get bigger.

Understand the result from Joint Variation Calculator

Compare another tool, review the underlying idea, then solve a fresh problem without copying the example.

Calculators related to Joint Variation Calculator

See all calculators →

Algebra calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Quadratic formula calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Graphing calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Understand algebra behind this calculator

A calculator can check the arithmetic; use the algebra subject guide to rebuild the method, algebra practice questions to test selection, and the math formula library to confirm conditions and notation.