Units and estimation: Name the objects and notation before applying a rule.
Linear models
Linear models: Connect the symbolic form to a graph, diagram, table, or example.
Growth and decay
Growth and decay: Compare two methods and record when each one is valid.
Optimization
Optimization: Finish with an unfamiliar problem and an independent check.
Regression models
Regression models: Name the objects and notation before applying a rule.
Model validation
Model validation: Connect the symbolic form to a graph, diagram, table, or example.
Eight original decision checks
These fixed prompts test study and verification choices across the course map. The interactive builder above creates mathematical questions separately.
Question 1: Convert 90 kilometers per hour into meters per second.
Units and estimation
25 m/s
324 m/s
1.5 m/s
50 m/s
Inspect the reasoning
One kilometer is 1,000 meters, so 90 km is 90,000 meters.
One hour is 3,600 seconds.
Divide: 90,000 / 3,600.
90,000 / 3,600 = 25, so the speed is 25 meters per second.
Best choice: 25 m/s
Question 2: A dispenser holds 15 liters. How many 250 milliliter cups can it fill?
Units and estimation
60 cups
6 cups
600 cups
37 cups
Inspect the reasoning
Put both amounts in the same unit. 15 liters is 15 x 1,000 = 15,000 milliliters.
Each cup takes 250 milliliters.
15,000 / 250 = 60.
So the dispenser fills 60 cups.
Best choice: 60 cups
Question 3: A rental costs $45 plus $0.28 per mile. What does a 120 mile trip cost?
Linear models
$78.60
$33.60
$45.28
$87.60
Inspect the reasoning
The model is cost = 45 + 0.28m, where m is miles.
The mileage charge is 0.28 x 120.
0.28 x 120 = 33.60.
45 + 33.60 = 78.60, so the trip costs $78.60.
Best choice: $78.60
Question 4: A substance has a half-life of 12 years. If 80 grams are stored, how much is left after 36 years?
Growth and decay
10 grams
20 grams
26.7 grams
5 grams
Inspect the reasoning
36 years is 36 / 12 = 3 half-lives.
After one half-life: 80 / 2 = 40 grams.
After two: 40 / 2 = 20 grams.
After three: 20 / 2 = 10 grams.
Best choice: 10 grams
Question 5: A farmer fences a rectangular pen against a straight wall using 60 m of fence on the other three sides. What is the largest possible area?
Optimization
450 square m
225 square m
400 square m
900 square m
Inspect the reasoning
Let the two sides at right angles to the wall each be y, and the side parallel to the wall be x, so x + 2y = 60.
Then x = 60 - 2y and the area is A = y(60 - 2y) = 60y - 2y^2.
This parabola opens downward, so the maximum is at y = -60 / (2 x -2) = 15.
Then x = 60 - 30 = 30, and the area is 30 x 15 = 450 square m.
Best choice: 450 square m
Question 6: A regression line is y = 2.4x + 11. At x = 25 the measured value is 68. What is the residual?
Regression models
-3
3
71
-71
Inspect the reasoning
First predict: 2.4 x 25 = 60, and 60 + 11 = 71.
A residual is the observed value minus the predicted value.
68 - 71 = -3.
The negative sign means the model predicted too high at that point.
Best choice: -3
Question 7: A linear model reports R-squared = 0.85. What does that mean?
Model validation
The model explains 85% of the variation in the response.
85% of the predictions are exactly correct.
The slope of the line is 0.85.
The model will be right 85% of the time on new data.
Inspect the reasoning
R-squared compares the variation the model explains with the total variation in the data.
0.85 means 85 out of every 100 units of variation are accounted for by the model.
The remaining 15% is variation the model does not capture.
R-squared says nothing about how many single predictions are exactly right, and nothing on its own about new data.
Best choice: The model explains 85% of the variation in the response.
Question 8: A town of 8,000 people grows 3% each year. What is the population after 10 years, to the nearest person?
Growth and decay
10,751
10,400
8,240
16,000
Inspect the reasoning
A 3% yearly rise multiplies the population by 1.03 each year.
After 10 years the population is 8,000 x 1.03^10.
1.03^10 is about 1.343916.
8,000 x 1.343916 = 10,751.33, so about 10,751 people.
Best choice: 10,751
After the run
Sort each miss into interpretation, recall, setup, execution, verification, or pacing. Schedule a changed question that tests the corrected decision without reusing the same surface details.
When should I increase difficulty?
Increase it after setup is accurate without a clue and you can explain why the method fits.
When should I use test mode?
Use it once guided sets are stable and you want evidence about selection, pacing, and sustained attention.