Angle measure: Name the objects and notation before applying a rule.
Unit circle
Unit circle: Connect the symbolic form to a graph, diagram, table, or example.
Graphs of sine and cosine
Graphs of sine and cosine: Compare two methods and record when each one is valid.
Identities
Identities: Finish with an unfamiliar problem and an independent check.
Trig equations
Trig equations: Name the objects and notation before applying a rule.
Sine and cosine laws
Sine and cosine laws: Connect the symbolic form to a graph, diagram, table, or example.
Eight original decision checks
These fixed prompts test study and verification choices across the course map. The interactive builder above creates mathematical questions separately.
Question 1: Convert 210 degrees to radians.
Angle measure
7 pi / 6
5 pi / 6
7 pi / 4
11 pi / 6
Inspect the reasoning
Multiply degrees by pi / 180 to get radians.
210 x pi / 180 = 210 pi / 180.
Divide top and bottom by 30: 210 / 30 = 7 and 180 / 30 = 6.
So 210 degrees is 7 pi / 6 radians.
Best choice: 7 pi / 6
Question 2: A circle has a radius of 8 cm. What arc length does a central angle of 2.5 radians cut off?
Angle measure
20 cm
3.2 cm
12.6 cm
50 cm
Inspect the reasoning
Arc length equals radius times the angle, when the angle is measured in radians.
There is no need to convert, because 2.5 is already in radians.
8 x 2.5 = 20.
The arc is 20 cm long.
Best choice: 20 cm
Question 3: What is the exact value of sin(5 pi / 3)?
Unit circle
negative square root of 3, over 2
-1/2
square root of 3, over 2
1/2
Inspect the reasoning
5 pi / 3 is pi / 3 short of a full turn, so it sits in the fourth quadrant.
Sine is negative in the fourth quadrant.
The reference angle is pi / 3, and sin(pi / 3) = square root of 3, over 2.
So sin(5 pi / 3) = negative square root of 3, over 2.
Best choice: negative square root of 3, over 2
Question 4: For y = 3 sin(2x - pi), what are the amplitude and the period?
Graphs of sine and cosine
amplitude 3, period pi
amplitude 3, period 2 pi
amplitude 6, period pi
amplitude 2, period 3
Inspect the reasoning
The number in front of sine sets the amplitude, so the amplitude is 3.
The period of sine is 2 pi divided by the number multiplying x.
Here that number is 2.
2 pi / 2 = pi, so the period is pi.
Best choice: amplitude 3, period pi
Question 5: If sin(theta) = 3/5 and theta is in the second quadrant, what is tan(theta)?
Identities
-3/4
3/4
-4/3
4/5
Inspect the reasoning
Use sin^2 + cos^2 = 1, so cos^2 = 1 - (3/5)^2 = 1 - 9/25 = 16/25.
That gives cos = 4/5 or -4/5.
In the second quadrant cosine is negative, so cos(theta) = -4/5.
tan = sin / cos = (3/5) / (-4/5) = -3/4.
Best choice: -3/4
Question 6: Solve 2 cos(x) + 1 = 0 for x between 0 and 2 pi.
Trig equations
x = 2 pi / 3 and x = 4 pi / 3
x = pi / 3 and x = 5 pi / 3
x = pi / 6 and x = 11 pi / 6
x = pi / 2 and x = 3 pi / 2
Inspect the reasoning
Rearrange to cos(x) = -1/2.
The reference angle with cosine 1/2 is pi / 3.
Cosine is negative in the second and third quadrants.
Second quadrant: pi - pi/3 = 2 pi / 3. Third quadrant: pi + pi/3 = 4 pi / 3.
Best choice: x = 2 pi / 3 and x = 4 pi / 3
Question 7: In a triangle, angle A = 40 degrees, angle B = 75 degrees, and side a = 12. Find side b to one decimal place.
Sine and cosine laws
18.0
7.9
13.5
20.4
Inspect the reasoning
The law of sines says a / sin A = b / sin B.
Rearranged, b = a x sin B / sin A = 12 x sin 75 / sin 40.
sin 75 is about 0.9659 and sin 40 is about 0.6428.
12 x 0.9659 / 0.6428 = 18.0 to one decimal place.
Best choice: 18.0
Question 8: Two sides of a triangle are 7 and 10, and the angle between them is 60 degrees. How long is the third side, to two decimal places?
Sine and cosine laws
8.89
12.21
6.24
9.43
Inspect the reasoning
Use the law of cosines: c^2 = a^2 + b^2 - 2ab cos(C).
7^2 + 10^2 = 49 + 100 = 149.
2 x 7 x 10 x cos 60 = 140 x 0.5 = 70.
c^2 = 149 - 70 = 79, and the square root of 79 is 8.89.
Best choice: 8.89
After the run
Sort each miss into interpretation, recall, setup, execution, verification, or pacing. Schedule a changed question that tests the corrected decision without reusing the same surface details.
When should I increase difficulty?
Increase it after setup is accurate without a clue and you can explain why the method fits.
When should I use test mode?
Use it once guided sets are stable and you want evidence about selection, pacing, and sustained attention.