What would you like to understand?

Popular destinationsCalculatorsCoursesPracticeFormulas

Unlock Premium Help

Explore every tutor and study workspace for seven days, with no daily AI cap during the trial.

Choose a billing period
Ask a parent to pay

Nothing is charged during the first seven days. Unless you cancel, the plan you selected begins when the trial ends and renews on its stated schedule. Manage cancellation from your plan page. Stripe handles the payment details.

The Unit Circle

On the unit circle, the point reached by angle $\theta$ is $(\cos\theta,\sin\theta)$. One diagram therefore stores exact trig values and their signs.

Start with a case you can inspect

At $\pi/3$, the first-quadrant reference triangle gives coordinates $(1/2,\sqrt3/2)$.

  1. Step 1 - Convert to degrees to get your bearings: $\dfrac{4\pi}{3}\times\dfrac{180}{\pi}=240^\circ$
  2. Step 2 - Find the quadrant: $240^\circ$ falls between $180^\circ$ and $270^\circ$, so the terminal side lands in quadrant III.
  3. Step 3 - Find the reference angle: $240^\circ-180^\circ=60^\circ$, which is $\dfrac{4\pi}{3}-\pi=\dfrac{\pi}{3}$.
  4. Step 4 - Look up the point for that reference angle: At $60^\circ$ the first-quadrant point is $\left(\tfrac12,\tfrac{\sqrt3}{2}\right)$.
  5. Step 5 - Attach the quadrant III signs: In quadrant III both coordinates are negative, so the point is $\left(-\tfrac12,-\tfrac{\sqrt3}{2}\right)$.
  6. Step 6 - Read cosine and sine off the point: $\cos\dfrac{4\pi}{3}=-\dfrac12$ and $\sin\dfrac{4\pi}{3}=-\dfrac{\sqrt3}{2}$
  7. Step 7 - Divide for tangent: $\tan\dfrac{4\pi}{3}=\dfrac{-\sqrt3/2}{-1/2}=\sqrt3$. Two negatives divide to a positive, which matches tangent being positive in quadrant III.
  8. Step 8 - Check the point really is on the circle: $\left(-\tfrac12\right)^2+\left(-\tfrac{\sqrt3}{2}\right)^2=\tfrac14+\tfrac34=1$

Change one feature and predict what follows

Find all six trigonometric values at $5\pi/6$ and explain the signs using quadrant II.

Show the worked answer after attempting it

The angle $5\pi/6$ is $150^\circ$, which lands in quadrant II. Its reference angle is $\pi-5\pi/6=\pi/6$, or $30^\circ$, whose first-quadrant point is $\left(\tfrac{\sqrt3}{2},\tfrac12\right)$. In quadrant II the across value is negative and the up value is positive, so the point is $\left(-\tfrac{\sqrt3}{2},\tfrac12\right)$. That gives $\cos\tfrac{5\pi}{6}=-\tfrac{\sqrt3}{2}$ and $\sin\tfrac{5\pi}{6}=\tfrac12$.

Dividing, $\tan\tfrac{5\pi}{6}=\tfrac{1/2}{-\sqrt3/2}=-\tfrac{1}{\sqrt3}=-\tfrac{\sqrt3}{3}$. The reciprocals follow: $\csc=2$, $\sec=-\tfrac{2}{\sqrt3}=-\tfrac{2\sqrt3}{3}$, and $\cot=-\sqrt3$. Only sine and its reciprocal cosecant come out positive, because in quadrant II only the up value is positive.

Reference and notation for the unit circle

Exact first-quadrant values. Every other angle on the circle is one of these five with a sign attached.

Exact first-quadrant values. Every other angle on the circle is one of these five with a sign attached.
Angle (degrees)Angle (radians)sincostan
00010
30pi/61/2sqrt(3)/2sqrt(3)/3
45pi/4sqrt(2)/2sqrt(2)/21
60pi/3sqrt(3)/21/2sqrt(3)
90pi/210undefined

Language you need to use precisely

Unit circle
The unit circle is the circle of radius exactly one unit centered at the origin, and its radius of $1$ is what makes the coordinates of a point equal to the cosine and sine of its angle.
Standard position
An angle is in standard position when its vertex sits at the origin and its starting arm lies along the positive $x$-axis, which is the setup every unit-circle value assumes.
Terminal side
The terminal side is the arm of the angle after it has been swept, and the spot where it crosses the unit circle is the point $(\cos\theta,\sin\theta)$.
Reference angle
A reference angle is the sharp, positive angle between the terminal side and the $x$-axis, and it is always between $0$ and $90^\circ$, so it lets you reuse the five first-quadrant values everywhere.
Radian
A radian is the angle that wraps one radius length of arc around the circle, so a full turn is $2\pi$ radians and $\pi$ radians equals $180^\circ$.
Quadrant
A quadrant is one of the four regions the axes cut the plane into, numbered I to IV counterclockwise, and the quadrant a terminal side lands in decides the signs of the trig values.

What the model assumes

Know radians, coordinate quadrants, right-triangle ratios, and the Pythagorean theorem. Continue through the Trigonometry course when you need the complete sequence.

Move from the model to the symbols

  1. Convert the angle to a reference angle between $0$ and $\pi/2$.
  2. Use the special-triangle coordinates for that reference angle.
  3. Apply signs from the terminal quadrant and read cosine from $x$, sine from $y$, and tangent from $y/x$.

Test the interpretation and its limits

A result is useful only when it survives the original conditions and a second line of reasoning. Check the completed work before studying the error pattern below.

Check the unit circle by a second route

Check $(1/2)^2+(\sqrt3/2)^2=1$ and confirm both coordinates are positive in quadrant I.

Use the unit circle beyond one example

Alternating current

A spinning generator produces voltage that traces a sine wave, because the coil's position on a circle is what the wire feels. Mains power at $60$ Hz means the rotor sweeps $2\pi$ radians sixty times a second, so the voltage is $v=170\sin(120\pi t)$.

Ferris wheels and circular motion

A wheel of radius $25$ metres with its hub $27$ metres up puts a rider at height $27+25\sin\theta$. At $\theta=\pi/6$ that is $27+25(0.5)=39.5$ metres. Any rotating part, from a fan blade to a satellite, is tracked the same way.

Computer graphics

To place an object at distance $r$ and angle $\theta$ from a pivot, a program computes $(r\cos\theta,\,r\sin\theta)$. That single line puts enemies in a circle around a player, spaces spokes on a wheel, and aims a turret.

Connected ideas worth studying next

  • Pythagorean theorem: Every unit-circle point sits on a right triangle with legs $\cos\theta$ and $\sin\theta$ and hypotenuse $1$, so the theorem gives $\cos^2\theta+\sin^2\theta=1$ for free.
  • Trigonometric identities: The identities are the unit circle written as algebra, so once the circle is memorized the Pythagorean and quotient identities stop being facts to memorize and start being things to read.
  • Equation of a circle: The unit circle is the case $h=0$, $k=0$, and $r=1$ of the center-radius form, which is where $x^2+y^2=1$ comes from.

Ask for help with the decision, not only the answer

Bring your complete the unit circle problem and the first step you cannot justify to the AI math solver. Ask it to explain that decision, then reproduce the method and check it against the original conditions.

Questions students ask about the unit circle

Why is it called the unit circle?

Because its radius is one unit. That choice does the work: the hypotenuse of the reference triangle is $1$, so the ratio $\text{opposite}/\text{hypotenuse}$ is just the opposite side. The coordinates stop being ratios and become the trig values themselves.

How do I remember which quadrants are positive?

Use ASTC, often remembered as "All Students Take Calculus", reading counterclockwise from quadrant I. All six are positive in I, only Sine (and cosecant) in II, only Tangent (and cotangent) in III, only Cosine (and secant) in IV.

Why is tangent undefined at 90 degrees?

Because $\tan\theta=y/x$ and the point at $90^\circ$ is $(0,1)$, so the division is $1/0$. The same happens at $270^\circ$ where the point is $(0,-1)$. On a graph these show up as the vertical asymptotes of the tangent curve.

How do I convert between degrees and radians?

Multiply degrees by $\pi/180$ to get radians, and multiply radians by $180/\pi$ to get degrees. So $135^\circ\times\pi/180=3\pi/4$, and $7\pi/6\times180/\pi=210^\circ$. The anchor worth memorizing is that $180^\circ=\pi$ radians.

Get the next useful step for the unit circle.

Ask about the first decision you cannot yet justify.

Open the tutor