What would you like to understand?

Popular destinationsCalculatorsCoursesPracticeFormulas

Unlock Premium Help

Explore every tutor and study workspace for seven days, with no daily AI cap during the trial.

Choose a billing period
Ask a parent to pay

Nothing is charged during the first seven days. Unless you cancel, the plan you selected begins when the trial ends and renews on its stated schedule. Manage cancellation from your plan page. Stripe handles the payment details.

← AP ChemistryReady

Find out what you can choose without a model.

Guided mode reveals one clue and immediate feedback. Quiet-test mode postpones the review until the complete run is submitted.

Course areas in this rehearsal

Treat the list as a dependency map. A later miss may point back to an earlier definition or representation.

Atomic Structure and Properties

Atomic Structure and Properties: Name the objects and notation before applying a rule.

Compound Structure and Properties

Compound Structure and Properties: Connect the symbolic form to a graph, diagram, table, or example.

Properties of Substances and Mixtures

Properties of Substances and Mixtures: Compare two methods and record when each one is valid.

Chemical Reactions

Chemical Reactions: Finish with an unfamiliar problem and an independent check.

Kinetics

Kinetics: Name the objects and notation before applying a rule.

Thermochemistry

Thermochemistry: Connect the symbolic form to a graph, diagram, table, or example.

Equilibrium

Equilibrium: Compare two methods and record when each one is valid.

Acids and Bases

Acids and Bases: Finish with an unfamiliar problem and an independent check.

Thermodynamics and Electrochemistry

Thermodynamics and Electrochemistry: Name the objects and notation before applying a rule.

Eight original decision checks

These fixed prompts test study and verification choices across the course map. The interactive builder above creates mathematical questions separately.

Question 1: An element has two isotopes: 75% with mass 35 and 25% with mass 37. What is the average atomic mass?

Atomic Structure and Properties

  1. 35.5
  2. 36.0
  3. 36.5
  4. 35.0
Inspect the reasoning
  1. Multiply each isotope mass by its share of the sample.
  2. 0.75 x 35 = 26.25.
  3. 0.25 x 37 = 9.25.
  4. 26.25 + 9.25 = 35.5. The answer sits closer to 35 because that isotope is more common.

Best choice: 35.5

Question 2: What is the molarity of a solution made from 0.5 mol of solute in 250 mL of solution?

Properties of Substances and Mixtures

  1. 2.0 M
  2. 0.5 M
  3. 0.125 M
  4. 125 M
Inspect the reasoning
  1. Molarity is moles of solute per liter of solution.
  2. Convert the volume: 250 mL = 0.250 L.
  3. 0.5 / 0.250 = 2.0.
  4. So the solution is 2.0 M.

Best choice: 2.0 M

Question 3: For 2 H2 + O2 gives 2 H2O, you start with 3 mol H2 and 2 mol O2. How much water forms?

Chemical Reactions

  1. 3 mol
  2. 2 mol
  3. 4 mol
  4. 5 mol
Inspect the reasoning
  1. The equation needs 2 mol H2 for every 1 mol O2.
  2. 3 mol H2 would pair with only 1.5 mol O2, and 2 mol O2 are available, so hydrogen runs out first.
  3. Hydrogen is the limiting reactant.
  4. The ratio of H2 to H2O is 2 to 2, so 3 mol H2 makes 3 mol of water.

Best choice: 3 mol

Question 4: A first-order reaction has a half-life of 20 minutes. What fraction of the reactant remains after 60 minutes?

Kinetics

  1. 1/8
  2. 1/3
  3. 1/6
  4. 1/4
Inspect the reasoning
  1. For a first-order reaction the half-life does not depend on concentration.
  2. 60 minutes is 60 / 20 = 3 half-lives.
  3. Each half-life leaves half of what was there: 1/2, then 1/4, then 1/8.
  4. So 1/8 of the reactant remains.

Best choice: 1/8

Question 5: How much heat is absorbed when 50.0 g of water warms by 20.0 degrees Celsius? Use c = 4.18 J per g per degree.

Thermochemistry

  1. 4,180 J
  2. 418 J
  3. 1,045 J
  4. 41,800 J
Inspect the reasoning
  1. Use q = m c times the change in temperature.
  2. 50.0 x 4.18 = 209 J per degree.
  3. 209 x 20.0 = 4,180.
  4. So the water absorbs 4,180 J, or about 4.18 kJ.

Best choice: 4,180 J

Question 6: For A in equilibrium with B, Kc = 4.0. Starting from 1.0 M A and no B, what is the equilibrium concentration of B?

Equilibrium

  1. 0.80 M
  2. 0.20 M
  3. 0.50 M
  4. 4.0 M
Inspect the reasoning
  1. Let x be the amount of A that converts, so at equilibrium B is x and A is 1 - x.
  2. The equilibrium expression is x / (1 - x) = 4.0.
  3. Multiply out: x = 4 - 4x, so 5x = 4.
  4. x = 0.80, so B is 0.80 M and A is 0.20 M.

Best choice: 0.80 M

Question 7: What are the pH and pOH of a 0.010 M solution of HCl at 25 degrees Celsius?

Acids and Bases

  1. pH 2.00 and pOH 12.00
  2. pH 12.00 and pOH 2.00
  3. pH 1.00 and pOH 13.00
  4. pH 0.010 and pOH 13.99
Inspect the reasoning
  1. HCl is a strong acid, so it fully ionizes and the hydrogen ion concentration is 0.010 M.
  2. pH is the negative log of that: the log of 0.010 is -2, so pH = 2.00.
  3. At 25 degrees Celsius, pH + pOH = 14.00.
  4. 14.00 - 2.00 = 12.00, so pOH = 12.00.

Best choice: pH 2.00 and pOH 12.00

Question 8: A reaction has a change in enthalpy of +50 kJ and a change in entropy of +0.10 kJ/K. Is it spontaneous at 300 K?

Thermodynamics and Electrochemistry

  1. No, because the free energy change is +20 kJ
  2. Yes, because the free energy change is -20 kJ
  3. Yes, because entropy increases
  4. No, because the free energy change is +80 kJ
Inspect the reasoning
  1. Use the free energy equation: change in G equals change in H minus T times change in S.
  2. T times the entropy change is 300 x 0.10 = 30 kJ.
  3. 50 - 30 = 20 kJ.
  4. A positive free energy change means the reaction is not spontaneous at 300 K, though it would be above 500 K.

Best choice: No, because the free energy change is +20 kJ

After the run

Sort each miss into interpretation, recall, setup, execution, verification, or pacing. Schedule a changed question that tests the corrected decision without reusing the same surface details.

When should I increase difficulty?

Increase it after setup is accurate without a clue and you can explain why the method fits.

When should I use test mode?

Use it once guided sets are stable and you want evidence about selection, pacing, and sustained attention.

All course units are eligible.

Printed question coverage
QuestionsReview
8 original promptsChoices, answer, and worked reasoning

What this AP Chemistry rehearsal measures