Treat the list as a dependency map. A later miss may point back to an earlier definition or representation.
Electrostatics
Electrostatics: Name the objects and notation before applying a rule.
Conductors, Capacitors, and Dielectrics
Conductors, Capacitors, and Dielectrics: Connect the symbolic form to a graph, diagram, table, or example.
Electric Circuits
Electric Circuits: Compare two methods and record when each one is valid.
Magnetic Fields
Magnetic Fields: Finish with an unfamiliar problem and an independent check.
Electromagnetism
Electromagnetism: Name the objects and notation before applying a rule.
Eight original decision checks
These fixed prompts test study and verification choices across the course map. The interactive builder above creates mathematical questions separately.
Question 1: What is the electric field 0.2 m from a 4 microcoulomb point charge? Use k = 8.99 x 10^9.
Electrostatics
about 9.0 x 10^5 N/C
about 1.8 x 10^5 N/C
about 3.6 x 10^4 N/C
about 9.0 x 10^4 N/C
Inspect the reasoning
The field of a point charge is kQ divided by the distance squared.
kQ = 8.99 x 10^9 x 4 x 10^-6 = 3.596 x 10^4.
The distance squared is 0.2^2 = 0.04.
3.596 x 10^4 / 0.04 = 8.99 x 10^5, about 9.0 x 10^5 N/C.
Best choice: about 9.0 x 10^5 N/C
Question 2: What is the electric potential 0.5 m from a 3 microcoulomb point charge? Use k = 8.99 x 10^9.
Electrostatics
about 5.4 x 10^4 V
about 1.1 x 10^5 V
about 2.7 x 10^4 V
about 5.4 x 10^5 V
Inspect the reasoning
Potential from a point charge is kQ divided by the distance, not the distance squared.
kQ = 8.99 x 10^9 x 3 x 10^-6 = 2.697 x 10^4.
Divide by r = 0.5.
2.697 x 10^4 / 0.5 = 5.394 x 10^4, about 5.4 x 10^4 V.
Best choice: about 5.4 x 10^4 V
Question 3: A parallel-plate capacitor has plates of area 0.02 m^2 separated by 0.001 m of vacuum. What is its capacitance?
Conductors, Capacitors, and Dielectrics
177 pF
17.7 pF
1.77 nF
8.85 pF
Inspect the reasoning
The formula is C = epsilon-zero times area divided by separation.
epsilon-zero is 8.85 x 10^-12 F/m.
Area over separation is 0.02 / 0.001 = 20 m.
8.85 x 10^-12 x 20 = 1.77 x 10^-10 F, which is 177 pF.
Best choice: 177 pF
Question 4: How much energy is stored in a 200 microfarad capacitor charged to 50 V?
Conductors, Capacitors, and Dielectrics
0.25 J
0.5 J
0.005 J
2.5 J
Inspect the reasoning
Stored energy is one half C times V squared.
V squared is 50^2 = 2,500.
C times V squared is 200 x 10^-6 x 2,500 = 0.5.
Half of 0.5 is 0.25 J.
Best choice: 0.25 J
Question 5: A 2,000 ohm resistor charges a 100 microfarad capacitor. What is the time constant, and what fraction of full charge is reached after one time constant?
Electric Circuits
0.2 s and about 63%
0.2 s and about 37%
2.0 s and about 63%
0.02 s and about 63%
Inspect the reasoning
The time constant is resistance times capacitance.
2,000 x 100 x 10^-6 = 0.2 s.
Charging follows 1 - e^(-t / RC), and at t = RC the exponential is e^-1 = 0.368.
1 - 0.368 = 0.632, so about 63% of full charge.
Best choice: 0.2 s and about 63%
Question 6: A 4 ohm resistor and a 12 ohm resistor are in parallel. What is the equivalent resistance?
Electric Circuits
3 ohms
16 ohms
8 ohms
6 ohms
Inspect the reasoning
For parallel resistors, add the reciprocals.
1/4 + 1/12 = 3/12 + 1/12 = 4/12 = 1/3.
Take the reciprocal of that sum.
The equivalent resistance is 3 ohms, smaller than either resistor as expected.
Best choice: 3 ohms
Question 7: A long solenoid has 1,000 turns per meter and carries 2 A. What is the magnetic field inside? Use the permeability of free space, 4 pi x 10^-7.
Magnetic Fields
about 2.5 x 10^-3 T
about 2.5 x 10^-4 T
about 1.3 x 10^-3 T
about 8.0 x 10^-4 T
Inspect the reasoning
Inside a long solenoid the field is the permeability times turns per meter times current.
4 pi x 10^-7 is about 1.2566 x 10^-6.
Multiply by 1,000 turns per meter: 1.2566 x 10^-3.
Multiply by 2 A: 2.513 x 10^-3 T.
Best choice: about 2.5 x 10^-3 T
Question 8: A magnetic field through a 0.05 m^2 loop changes by 0.4 T in 0.2 s. What is the magnitude of the induced EMF?
Electromagnetism
0.1 V
0.02 V
1.0 V
0.4 V
Inspect the reasoning
Faraday's law says the EMF equals the rate of change of magnetic flux.
The flux change is the field change times the area: 0.4 x 0.05 = 0.02 Wb.
Divide by the time taken: 0.02 / 0.2.
That gives 0.1 V.
Best choice: 0.1 V
After the run
Sort each miss into interpretation, recall, setup, execution, verification, or pacing. Schedule a changed question that tests the corrected decision without reusing the same surface details.
When should I increase difficulty?
Increase it after setup is accurate without a clue and you can explain why the method fits.
When should I use test mode?
Use it once guided sets are stable and you want evidence about selection, pacing, and sustained attention.
Building your question set…
All course units are eligible.
Printed question coverage
Questions
Review
8 original prompts
Choices, answer, and worked reasoning
What this AP Physics C: Electricity and Magnetism rehearsal measures
AP Physics C: Electricity and Magnetism allows a four-function, scientific, or graphing calculator on multiple choice.