What would you like to understand?

Popular destinationsCalculatorsCoursesPracticeFormulas

Unlock Premium Help

Explore every tutor and study workspace for seven days, with no daily AI cap during the trial.

Choose a billing period
Ask a parent to pay

Nothing is charged during the first seven days. Unless you cancel, the plan you selected begins when the trial ends and renews on its stated schedule. Manage cancellation from your plan page. Stripe handles the payment details.

Fraction to Decimal Calculator

Divide a numerator by a nonzero denominator and identify terminating or repeating behavior.

Identify the quantities

Fraction to Decimal inputs

Enter the measurements this task uses. Keep units consistent before calculating.

Decimal valueEnter the known values

The method, result, and an independent check will appear here.

Method for this result

  1. Complete the inputs and calculate.

Division check

  1. The check will use a different relationship or reverse operation where possible.

Quantities and units to identify first

Symbols and inputs for Fraction to Decimal Calculator
SymbolQuantityMeaning
aNumeratorThe top number. It is the one being divided, so it goes inside the division box.
bDenominatorThe bottom number. It does the dividing and it decides whether the decimal ends.
remainderWhat is left at each stepA remainder of 0 means the decimal stops. A repeated remainder means it repeats.
the barRepeating notationA line drawn over the digits that repeat, as in 0.416 with a bar over the 6.

The measurement relationship

a/b = a ÷ b. It terminates only when b, in lowest terms, has no prime factors except 2 and 5.

Measure one complete case with Fraction to Decimal Calculator

  1. Convert 5/8: 5 ÷ 8
  2. 8 does not go into 5, so write 0. and add a zero: 50 ÷ 8 = 6 remainder 2, so far 0.6
  3. Bring down another zero: 20 ÷ 8 = 2 remainder 4, so far 0.62
  4. And another: 40 ÷ 8 = 5 remainder 0, so far 0.625
  5. Remainder 0 means the division has finished: 5/8 = 0.625
  6. Check the bottom number: 8 = 2 × 2 × 2, only 2s, which is why it stopped

Fractions that repeat, and the block of digits that comes round again

Fractions that repeat, and the block of digits that comes round again
FractionDecimalRepeating blockLength of the block
1/30.333…31 digit
1/60.1666…61 digit
5/60.8333…31 digit
1/70.142857142857…1428576 digits
2/70.285714285714…2857146 digits
1/90.111…11 digit
1/110.0909…092 digits
4/110.3636…362 digits
1/120.08333…31 digit
1/130.076923076923…0769236 digits

Unit, scale, and shape mistakes to catch

5/8 = 8 ÷ 5 = 1.6

The division was done upside down, which turns a number under 1 into a number over 1.

Repair: The top goes inside: 5 ÷ 8 = 0.625.

1/7 = 0.14

Stopping after two digits throws away most of the repeating block.

Repair: 1/7 = 0.142857142857…, so carry the digits along and round only at the end.

5/12 = 0.512

The two numbers were simply written either side of a point instead of being divided.

Repair: Do the division: 5 ÷ 12 = 0.41666…

A changed measurement case

  1. A different case: the decimal never ends: 5/12
  2. First step: 50 ÷ 12 = 4 remainder 2, so far 0.4
  3. Second step: 20 ÷ 12 = 1 remainder 8, so far 0.41
  4. Third step: 80 ÷ 12 = 6 remainder 8, so far 0.416
  5. The remainder 8 has come back: the same step will repeat forever, so the 6 repeats
  6. Write it properly: 5/12 = 0.41666…, or 0.416 with a bar over the 6
  7. Check the bottom number: 12 = 2 × 2 × 3, and the 3 is what stops it ending

Questions about measuring with Fraction to Decimal Calculator

Can I tell whether a fraction repeats before doing the division?

Yes. Reduce it first, then factor the bottom number. 7/40 has 40 = 2 × 2 × 2 × 5, so it terminates at 0.175. 7/30 has 30 = 2 × 3 × 5, and that 3 guarantees a repeat. This check takes five seconds and saves a long division that was never going to end.

How long can a repeating block get?

At most one less than the bottom number, because there are only that many possible remainders before one has to come back. For sevenths the block is six digits long, which is the maximum. For elevenths it is only two, even though ten were allowed.

What does the bar over the digits mean?

It marks exactly which digits repeat. In 0.416 with the bar over only the 6, the 4 and 1 happen once and the 6 goes on forever. If the bar covered 416 it would mean 0.416416416…, which is a completely different number.

How do I convert a mixed number like 2 and 3/8?

Convert just the fraction part and add the whole number back on. 3 ÷ 8 = 0.375, so 2 and 3/8 = 2.375. You get the same answer from the improper fraction 19/8, since 19 ÷ 8 = 2.375.

Understand the result from Fraction to Decimal Calculator

Compare another tool, review the underlying idea, then solve a fresh problem without copying the example.

Calculators related to Fraction to Decimal Calculator

See all calculators →

Arithmetic calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Four-function calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Scientific calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Understand arithmetic behind this calculator

A calculator can check the arithmetic; use the arithmetic subject guide to rebuild the method, arithmetic practice questions to test selection, and the math formula library to confirm conditions and notation.