What would you like to understand?

Popular destinationsCalculatorsCoursesPracticeFormulas

Unlock Premium Help

Explore every tutor and study workspace for seven days, with no daily AI cap during the trial.

Choose a billing period
Ask a parent to pay

Nothing is charged during the first seven days. Unless you cancel, the plan you selected begins when the trial ends and renews on its stated schedule. Manage cancellation from your plan page. Stripe handles the payment details.

Parallel Circuit Calculator

Combine parallel branch resistances and calculate total source current.

Build the system model

Parallel Circuit inputs

Supply the known physical quantities. The result keeps the model assumptions and units visible.

Circuit resultEnter the known values

The method, result, and an independent check will appear here.

Method for this result

  1. Complete the inputs and calculate.

Units and conservation check

  1. The check will use a different relationship or reverse operation where possible.

Known quantities, units, and model assumptions

Symbols and inputs for Parallel Circuit Calculator
SymbolQuantityMeaning
VSupply voltageThe same across every branch, in volts.
RₙBranch resistanceIn ohms. Each branch is independent of the others.
R_totalEquivalent resistanceWhat a single replacement resistor would have to be. Always less than the smallest branch.
IₙBranch currentV divided by that branch's resistance. Smaller resistance means bigger current.

The model connecting the quantities

1/R_total = 1/R₁ + 1/R₂ + 1/R₃ Iₙ = V / Rₙ I_total = ΣIₙ

Build one model from known values

  1. The circuit: 120 Ω and 240 Ω in parallel across 12 V
  2. Add the reciprocals: 1/120 + 1/240 = 2/240 + 1/240 = 3/240
  3. Flip to get the total: R_total = 240/3 = 80 Ω
  4. Current in the 120 Ω branch: 12 ÷ 120 = 0.1 A
  5. Current in the 240 Ω branch: 12 ÷ 240 = 0.05 A
  6. Total current: 0.1 + 0.05 = 0.15 A
  7. Check against the equivalent resistance: 12 ÷ 80 = 0.15 A ✓, and total power is 12 × 0.15 = 1.8 W

Change a condition and compare the model

  1. A different case: three branches on 24 V: 4 Ω, 6 Ω and 12 Ω in parallel
  2. Put the reciprocals over a common denominator: 1/4 + 1/6 + 1/12 = 3/12 + 2/12 + 1/12 = 6/12
  3. Flip: R_total = 12/6 = 2 Ω, smaller than the 4 Ω branch
  4. Branch currents: 24/4 = 6 A, 24/6 = 4 A, 24/12 = 2 A
  5. Total: 6 + 4 + 2 = 12 A
  6. Check: 24 ÷ 2 = 12 A ✓
  7. Read it: the smallest resistor carries the most current, exactly half the total here

Modeling assumptions and setup errors

R_total = 120 + 240 = 360 Ω

That is the series rule. Extra parallel paths make it easier for current to flow, so the total must go down, not up.

Repair: 1/120 + 1/240 = 3/240, so R_total = 80 Ω.

1/R = 1/120 + 1/240 = 3/240, so R = 3/240 = 0.0125 Ω

The final flip was forgotten, leaving the reciprocal rather than the resistance.

Repair: Invert: R = 240/3 = 80 Ω.

Using the product-over-sum shortcut on three resistors

R₁R₂/(R₁ + R₂) works for exactly two branches, not more.

Repair: For 4, 6 and 12 Ω use the reciprocal sum, or apply product-over-sum twice.

Parallel combinations and their equivalent resistance

Parallel combinations and their equivalent resistance
BranchesSum of reciprocalsR totalWhat to notice
100 Ω, 100 Ω0.0250 Ωtwo equal resistors halve
120 Ω, 240 Ω0.012580 Ωbelow the smaller branch, 120 Ω
100 Ω, 220 Ω0.01454568.75 Ωno whole-number answer, and that is normal
10 Ω, 1000 Ω0.1019.90 Ωa huge resistor barely changes the total
4 Ω, 6 Ω, 12 Ω0.52 Ωthree branches, still below the smallest
n identical Rn/RR/nthe general shortcut for equal branches

Questions about using the model

Why is the total resistance smaller than any single branch?

Each extra branch is another road for current to take. More roads means less opposition overall, so adding a 1000 Ω branch beside a 10 Ω one still lowers the total slightly, from 10 Ω to 9.90 Ω.

Why is house wiring parallel rather than series?

So every socket gets the full 120 V or 230 V, and so switching off a lamp does not cut power to the fridge. The cost is that each appliance adds current, and enough of them together trip the breaker.

Which branch carries the most current?

The one with the least resistance, because they all share the same voltage. In the three-branch example the 4 Ω path takes 6 A while the 12 Ω path takes only 2 A.

When is the product-over-sum shortcut safe?

Only with exactly two resistors: R₁R₂/(R₁ + R₂). For 120 and 240 that gives 28800/360 = 80 Ω. For three or more, either use the reciprocal sum or combine two at a time.

Understand the result from Parallel Circuit Calculator

Compare another tool, review the underlying idea, then solve a fresh problem without copying the example.

Calculators related to Parallel Circuit Calculator

See all calculators →

Graphing calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Scientific calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Four-function calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Understand mathematical modeling behind this calculator

A calculator can check the arithmetic; use the mathematical modeling subject guide to rebuild the method, mathematical modeling practice questions to test selection, and the math formula library to confirm conditions and notation.