What would you like to understand?

Popular destinationsCalculatorsCoursesPracticeFormulas

Unlock Premium Help

Explore every tutor and study workspace for seven days, with no daily AI cap during the trial.

Choose a billing period
Ask a parent to pay

Nothing is charged during the first seven days. Unless you cancel, the plan you selected begins when the trial ends and renews on its stated schedule. Manage cancellation from your plan page. Stripe handles the payment details.

Total Resistance Calculator

Compare series and parallel equivalent resistance for one resistor list.

Build the system model

Total Resistance inputs

Supply the known physical quantities. The result keeps the model assumptions and units visible.

Circuit resultEnter the known values

The method, result, and an independent check will appear here.

Method for this result

  1. Complete the inputs and calculate.

Units and conservation check

  1. The check will use a different relationship or reverse operation where possible.

Known quantities, units, and model assumptions

Symbols and inputs for Total Resistance Calculator
SymbolQuantityMeaning
R₁, R₂, R₃Individual resistancesIn ohms. Convert every value to the same unit before combining.
R_eqEquivalent resistanceThe single resistor that would behave identically at the terminals.
arrangementSeries or parallelSeries means one path through both; parallel means the two ends are joined to the same pair of nodes.
I, VCurrent and voltageOnce R_eq is known, Ohm's law gives whichever of these you need.

The model connecting the quantities

Series: R = R₁ + R₂ + … Parallel: 1/R = 1/R₁ + 1/R₂ + … Two in parallel: R = R₁R₂/(R₁ + R₂)

Build one model from known values

  1. The network: a 6 Ω resistor in series with a 12 Ω and a 4 Ω that are in parallel, on 18 V
  2. Do the innermost group first: 1/12 + 1/4 = 1/12 + 3/12 = 4/12
  3. Flip it: the parallel pair is equivalent to 3 Ω
  4. Now the outer group is a simple series pair: 6 + 3 = 9 Ω total
  5. Total current: 18 ÷ 9 = 2 A
  6. Voltage split: the 6 Ω drops 2 × 6 = 12 V, leaving 6 V across the parallel pair
  7. Split that 6 V between the branches: 6/12 = 0.5 A and 6/4 = 1.5 A, and 0.5 + 1.5 = 2 A ✓

Change a condition and compare the model

  1. A different case: two parallel pairs in series: (10 Ω ∥ 10 Ω) in series with (30 Ω ∥ 60 Ω), on 25 V
  2. First pair, equal resistors halve: 10 ÷ 2 = 5 Ω
  3. Second pair, using product over sum: 30 × 60 ÷ 90 = 1800 ÷ 90 = 20 Ω
  4. Add the two blocks in series: 5 + 20 = 25 Ω
  5. Current: 25 ÷ 25 = 1 A
  6. Voltage across each block: 1 × 5 = 5 V and 1 × 20 = 20 V, adding back to 25 V
  7. Read it: the 20 Ω block takes four times the voltage of the 5 Ω block, even though every resistor inside it is larger than 10 Ω

Modeling assumptions and setup errors

Averaging 6, 12 and 4 to get 7.33 Ω

Resistance is never an average. The arrangement decides the rule, and here the answer is 9 Ω.

Repair: Reduce the parallel pair to 3 Ω, then add the 6 Ω in series.

Combining 6 and 12 first because they are written first

6 is in series with the pair, not with the 12 alone, so the grouping was wrong.

Repair: Redraw the network and always collapse the innermost group first: (12 ∥ 4) = 3, then 6 + 3 = 9.

A parallel total that came out larger than one of its branches

That is impossible, so it flags an arithmetic slip, usually a missing final reciprocal.

Repair: Check against the smallest branch: 30 ∥ 60 must be under 30, and 20 Ω passes.

The two rules, with worked values

The two rules, with worked values
ArrangementFormulaExampleResultRule of thumb
Two in seriesR₁ + R₂120 + 240360 Ωbigger than either one
Two in parallelR₁R₂/(R₁ + R₂)120 × 240 / 36080 Ωsmaller than either one
n equal in seriesn · R3 × 100300 Ωscales up with n
n equal in parallelR / n100 / 333.33 Ωscales down with n
Three in parallel1/(1/R₁ + 1/R₂ + 1/R₃)4, 6 and 12 Ω2 Ωbelow the smallest branch
Series and parallel mixedinnermost group first6 + (12 ∥ 4)9 Ωcollapse one group at a time

Questions about using the model

How do I tell whether two resistors are in series or parallel?

Follow the wire. If current has to pass through the first to reach the second with no junction between them, they are in series. If both ends of one connect to both ends of the other, they are in parallel and share the same voltage.

What is a fast sanity check on a mixed network?

Compare the answer with the largest and smallest resistors present. The total of the worked example is 9 Ω, which sits below the 12 Ω branch because part of the network is parallel, and above the 4 Ω branch because part of it is series.

Do I need to convert kΩ and MΩ first?

Yes, or mix consistently. 4.7 kΩ + 10 kΩ = 14.7 kΩ is fine, but the moment you divide a voltage by it you must be clear that the current comes out in milliamps rather than amps.

Does a wire's own resistance matter?

Usually not against hundreds of ohms, but it does against very low values. A 0.1 Ω lead in series with a 2 Ω parallel block shifts the total by 5%, which is why precision measurements use four-wire connections.

Understand the result from Total Resistance Calculator

Compare another tool, review the underlying idea, then solve a fresh problem without copying the example.

Calculators related to Total Resistance Calculator

See all calculators →

Graphing calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Scientific calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Four-function calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Understand mathematical modeling behind this calculator

A calculator can check the arithmetic; use the mathematical modeling subject guide to rebuild the method, mathematical modeling practice questions to test selection, and the math formula library to confirm conditions and notation.