What would you like to understand?

Popular destinationsCalculatorsCoursesPracticeFormulas

Unlock Premium Help

Explore every tutor and study workspace for seven days, with no daily AI cap during the trial.

Choose a billing period
Ask a parent to pay

Nothing is charged during the first seven days. Unless you cancel, the plan you selected begins when the trial ends and renews on its stated schedule. Manage cancellation from your plan page. Stripe handles the payment details.

Series Circuit Calculator

Combine series resistance and apply Ohm's law to the complete branch.

Build the system model

Series Circuit inputs

Supply the known physical quantities. The result keeps the model assumptions and units visible.

Circuit resultEnter the known values

The method, result, and an independent check will appear here.

Method for this result

  1. Complete the inputs and calculate.

Units and conservation check

  1. The check will use a different relationship or reverse operation where possible.

Known quantities, units, and model assumptions

Symbols and inputs for Series Circuit Calculator
SymbolQuantityMeaning
VSupply voltageThe battery or source, in volts.
RₙEach resistanceIn ohms. Convert kΩ to Ω before adding: 4.7 kΩ = 4700 Ω.
ICurrentIn amps, and identical at every point in the loop.
VₙVoltage across one resistorAlso called the voltage drop. All the drops add back to V.

The model connecting the quantities

R_total = R₁ + R₂ + R₃ I = V / R_total Vₙ = I · Rₙ

Build one model from known values

  1. The circuit: a 12 V battery in series with 100 Ω, 220 Ω and 330 Ω
  2. Add the resistances: 100 + 220 + 330 = 650 Ω
  3. Current, the same everywhere: I = 12 ÷ 650 = 0.01846 A, or 18.46 mA
  4. Voltage across the 100 Ω: 0.01846 × 100 = 1.846 V
  5. Voltage across the 220 Ω: 0.01846 × 220 = 4.062 V
  6. Voltage across the 330 Ω: 0.01846 × 330 = 6.092 V
  7. Check the drops add to the supply: 1.846 + 4.062 + 6.092 = 12.00 V ✓, and total power is 12 × 0.01846 = 0.2215 W

Change a condition and compare the model

  1. A different case: a two-resistor voltage divider: 9 V across 4.7 kΩ in series with 10 kΩ
  2. Total resistance in ohms: 4700 + 10000 = 14700 Ω
  3. Current: 9 ÷ 14700 = 0.0006122 A, or 0.612 mA
  4. Output taken across the 10 kΩ: 0.0006122 × 10000 = 6.122 V
  5. The divider shortcut gives the same thing: 9 × 10000 ÷ 14700 = 6.122 V
  6. Power in the 4.7 kΩ resistor: I²R = (0.0006122)² × 4700 = 0.00176 W, about 1.8 mW
  7. Read it: the bigger resistor takes the bigger share of the voltage, 6.122 V against 2.878 V

Modeling assumptions and setup errors

Adding 100 + 220 + 330 as if they were currents and dividing V by each one

Each resistor does not see the full 12 V. Only the total resistance divides into the supply voltage.

Repair: One current for the whole loop: 12 ÷ 650 = 18.46 mA.

Adding 4.7 + 10 = 14.7 and then dividing 9 by 14.7

The units were mixed: 4.7 is in kΩ and the answer would be in milliamps, not amps.

Repair: Convert first: 4700 + 10000 = 14700 Ω, giving 0.612 mA.

Assuming the voltage splits evenly between the resistors

It splits in proportion to resistance, so the larger resistor always takes more.

Repair: Across 4.7 kΩ and 10 kΩ the split is 2.878 V and 6.122 V, not 4.5 V each.

Two resistors in series on a 12 V supply

Two resistors in series on a 12 V supply
R₁R₂R totalCurrentV across R₁V across R₂
100 Ω100 Ω200 Ω60 mA6 V6 V
100 Ω200 Ω300 Ω40 mA4 V8 V
100 Ω300 Ω400 Ω30 mA3 V9 V
100 Ω500 Ω600 Ω20 mA2 V10 V
1 kΩ1 kΩ2 kΩ6 mA6 V6 V

Questions about using the model

Why is the current the same everywhere in a series circuit?

Because there is only one path and charge cannot pile up. Every electron that leaves the battery has to pass through all three resistors in turn, so the same 18.46 mA is measured at any point in the loop.

How do I check my answer quickly?

Add the individual voltage drops. They must total the supply voltage exactly, which is Kirchhoff's voltage law. Here 1.846 + 4.062 + 6.092 = 12.00 V, so the current must have been right.

What is a voltage divider used for?

Getting a smaller voltage from a bigger supply, for example feeding a 3.3 V sensor from a 9 V battery. The output is V × R₂/(R₁ + R₂), which is 6.122 V for the pair above.

Does the order of the resistors matter?

No. Swapping the 100 Ω and the 330 Ω changes nothing about the total, the current or any individual drop. Only the sum matters in a series loop.

Understand the result from Series Circuit Calculator

Compare another tool, review the underlying idea, then solve a fresh problem without copying the example.

Calculators related to Series Circuit Calculator

See all calculators →

Graphing calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Scientific calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Four-function calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Understand mathematical modeling behind this calculator

A calculator can check the arithmetic; use the mathematical modeling subject guide to rebuild the method, mathematical modeling practice questions to test selection, and the math formula library to confirm conditions and notation.