What would you like to understand?

Popular destinationsCalculatorsCoursesPracticeFormulas

Unlock Premium Help

Explore every tutor and study workspace for seven days, with no daily AI cap during the trial.

Choose a billing period
Ask a parent to pay

Nothing is charged during the first seven days. Unless you cancel, the plan you selected begins when the trial ends and renews on its stated schedule. Manage cancellation from your plan page. Stripe handles the payment details.

RLC Circuit Calculator

Calculate ideal series RLC resonance, damping, and quality factor.

Build the system model

RLC Circuit inputs

Supply the known physical quantities. The result keeps the model assumptions and units visible.

Circuit resultEnter the known values

The method, result, and an independent check will appear here.

Method for this result

  1. Complete the inputs and calculate.

Units and conservation check

  1. The check will use a different relationship or reverse operation where possible.

Known quantities, units, and model assumptions

Symbols and inputs for RLC Circuit Calculator
SymbolQuantityMeaning
RResistanceIn ohms. It is the only part that removes energy, so it controls the damping.
LInductanceIn henries. 100 mH is 0.1 H.
CCapacitanceIn farads. 1 µF is 0.000001 F.
ζDamping ratioA plain number. Below 1 the circuit oscillates, at 1 it is critically damped, above 1 it is overdamped.

The model connecting the quantities

f₀ = 1 / (2π√(LC)) ζ = R / (2√(L/C)) Q = (1/R)·√(L/C) bandwidth = f₀ / Q

Build one model from known values

  1. The circuit: a series RLC with R = 100 Ω, L = 0.1 H and C = 1 µF
  2. Product of L and C: 0.1 × 0.000001 = 0.0000001, and √0.0000001 = 0.0003162
  3. Resonant frequency: f₀ = 1 ÷ (2π × 0.0003162) = 503.3 Hz
  4. Critical resistance: 2√(L/C) = 2√(0.1 ÷ 0.000001) = 2√100000 = 2 × 316.23 = 632.46 Ω
  5. Compare: R = 100 Ω is well below 632.46 Ω, so the circuit is underdamped and will ring
  6. Quality factor: Q = 316.23 ÷ 100 = 3.162, and the damping ratio is ζ = 100 ÷ 632.46 = 0.158
  7. Bandwidth of the resonance peak: 503.3 ÷ 3.162 = 159.2 Hz wide

Change a condition and compare the model

  1. A different case: keep L and C, raise the resistance: R = 2000 Ω, L = 0.1 H, C = 1 µF
  2. f₀ is unchanged: still 503.3 Hz, because R never appears in that formula
  3. Critical resistance is unchanged too: still 632.46 Ω
  4. Compare: 2000 Ω is above 632.46 Ω, so this circuit is overdamped
  5. Damping ratio: ζ = 2000 ÷ 632.46 = 3.162, more than three times critical
  6. Quality factor: Q = 316.23 ÷ 2000 = 0.158, so there is no ringing at all
  7. Set R exactly to 632.46 Ω instead: ζ = 1 exactly, which is critical damping: the fastest return with no overshoot

Modeling assumptions and setup errors

f₀ = 1/(2π√(LC)) with L = 100 and C = 1

Millihenries and microfarads were left unconverted, which shifts the answer by many orders of magnitude.

Repair: Use base units: L = 0.1 H and C = 0.000001 F, giving 503.3 Hz.

Expecting R to change the resonant frequency

R appears in the damping and the bandwidth, never in f₀ itself.

Repair: Both worked examples above resonate at 503.3 Hz even though one has 100 Ω and the other 2000 Ω.

Assuming a bigger R means more ringing

R is the loss term, so more of it means the energy drains faster and the ringing dies sooner.

Repair: At 100 Ω the circuit rings; at 2000 Ω it does not oscillate at all.

Damping in a series RLC with L = 0.1 H and C = 1 µF, so f₀ = 503.3 Hz and the critical resistance is 632.46 Ω

Damping in a series RLC with L = 0.1 H and C = 1 µF, so f₀ = 503.3 Hz and the critical resistance is 632.46 Ω
Rζ = R / 632.46QNameWhat you would see
0 Ω (ideal)0infiniteundampedrings forever at 503.3 Hz
100 Ω0.1583.162underdampedseveral visible cycles, then settles
400 Ω0.6320.791underdampedone overshoot, then settles
632.46 Ω1.0000.5critically dampedfastest settle, no overshoot at all
2000 Ω3.1620.158overdampedslow sag back, no overshoot

Questions about using the model

What does resonance actually mean here?

At f₀ the inductor's reactance and the capacitor's reactance are equal and opposite, so they cancel. A series circuit is then left with only R, which is why its current peaks sharply at 503.3 Hz.

What is Q in plain words?

It is how sharp and how long-lived the ringing is. Q = 3.162 means the resonance peak is 159 Hz wide out of 503 Hz, and the circuit rings for roughly three cycles before fading.

Why is critical damping useful if it does not ring?

Because it is the fastest possible return to rest without ever overshooting. Car suspensions and instrument needles are tuned near ζ = 1 for exactly that reason: you want the bump gone quickly, not bouncing.

How does a parallel RLC differ from a series one?

The resonant frequency formula is identical, but the roles of R invert. In series, a small R gives a high Q; in parallel, a large R gives a high Q, because the resistor is now a leak across the tank rather than a brake in the loop.

Understand the result from RLC Circuit Calculator

Compare another tool, review the underlying idea, then solve a fresh problem without copying the example.

Calculators related to RLC Circuit Calculator

See all calculators →

Graphing calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Scientific calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Four-function calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Understand mathematical modeling behind this calculator

A calculator can check the arithmetic; use the mathematical modeling subject guide to rebuild the method, mathematical modeling practice questions to test selection, and the math formula library to confirm conditions and notation.