What would you like to understand?

Popular destinationsCalculatorsCoursesPracticeFormulas

Unlock Premium Help

Explore every tutor and study workspace for seven days, with no daily AI cap during the trial.

Choose a billing period
Ask a parent to pay

Nothing is charged during the first seven days. Unless you cancel, the plan you selected begins when the trial ends and renews on its stated schedule. Manage cancellation from your plan page. Stripe handles the payment details.

RC Circuit Calculator

Calculate an RC time constant, cutoff frequency, and capacitor charging level.

Build the system model

RC Circuit inputs

Supply the known physical quantities. The result keeps the model assumptions and units visible.

Circuit resultEnter the known values

The method, result, and an independent check will appear here.

Method for this result

  1. Complete the inputs and calculate.

Units and conservation check

  1. The check will use a different relationship or reverse operation where possible.

Known quantities, units, and model assumptions

Symbols and inputs for RC Circuit Calculator
SymbolQuantityMeaning
RResistanceIn ohms. 470 kΩ is 470000 Ω.
CCapacitanceIn farads. 10 µF is 0.00001 F, and forgetting this conversion is the classic error.
τTime constantR × C, in seconds. Ohms times farads really does give seconds.
V₀Supply or starting voltageThe final voltage when charging, or the initial voltage when discharging.

The model connecting the quantities

τ = R · C charging: V(t) = V₀(1 − e^(−t/τ)) discharging: V(t) = V₀·e^(−t/τ) f_c = 1 / (2πRC)

Build one model from known values

  1. The circuit: a 9 V supply charging a 10 µF capacitor through 470 kΩ
  2. Convert to base units: R = 470000 Ω and C = 0.00001 F
  3. Time constant: τ = 470000 × 0.00001 = 4.7 s
  4. Voltage after one time constant: 9 × (1 − e⁻¹) = 9 × 0.632 = 5.689 V
  5. After three time constants, t = 14.1 s: 9 × (1 − e⁻³) = 9 × 0.950 = 8.552 V
  6. After five time constants, t = 23.5 s: 9 × (1 − e⁻⁵) = 9 × 0.993 = 8.939 V
  7. Read it: practically full at 23.5 s, and mathematically it never quite reaches 9 V

Change a condition and compare the model

  1. A different case: discharging the same capacitor: start at 9 V, same R and C, so τ is still 4.7 s
  2. After one time constant: 9 × e⁻¹ = 9 × 0.368 = 3.311 V
  3. Note the pattern: charging climbs to 63.2%, discharging falls to 36.8%, and the two always add to 100%
  4. After 10 seconds, which is 2.128 time constants: 9 × e^(−10/4.7) = 9 × 0.1191 = 1.072 V
  5. Now treat the same parts as a low-pass filter: f_c = 1 ÷ (2π × 4.7)
  6. Cutoff frequency: 0.0339 Hz, which is extremely low
  7. Read it: this pair passes only very slow signals, which is exactly what a long time constant means in the frequency picture

Modeling assumptions and setup errors

τ = 470 × 10 = 4700 s

The prefixes were ignored, so kilo-ohms were multiplied by microfarads as if both were base units.

Repair: R = 470000 Ω and C = 0.00001 F, giving τ = 4.7 s.

Assuming the capacitor charges at a steady rate and is full at 2τ

Charging is exponential: it slows down as the voltage difference shrinks.

Repair: At 2τ it is only 86.5% charged, and 5τ is the usual practical finish.

Using V(t) = V₀·e^(−t/τ) for charging

That is the discharge curve, and it starts at V₀ and falls instead of starting at 0 and rising.

Repair: Charging is V₀(1 − e^(−t/τ)), which gives 5.689 V at t = τ, not 3.311 V.

Charging and discharging a 9 V supply, where τ = 4.7 s

Charging and discharging a 9 V supply, where τ = 4.7 s
TimeElapsedCharged toVoltage while chargingRemaining while discharging
00 s0%0 V100%
1τ4.7 s63.2%5.689 V36.8%
2τ9.4 s86.5%7.782 V13.5%
3τ14.1 s95.0%8.552 V5.0%
4τ18.8 s98.2%8.835 V1.8%
5τ23.5 s99.3%8.939 V0.7%

Questions about using the model

Why is 63.2% the magic number?

It is 1 − 1/e, and e is baked into the exponential solution of the circuit's differential equation. Nobody chose 63.2%; it falls out of the mathematics, which is why every RC circuit shares it regardless of the component values.

Does a capacitor ever finish charging?

Not exactly. The curve approaches the supply voltage forever without reaching it. Engineers call 5τ finished because 0.7% left over is smaller than the tolerance of the components themselves.

How do R and C each change the timing?

Both stretch it in direct proportion, since τ is their product. Doubling R to 940 kΩ or doubling C to 20 µF each pushes τ from 4.7 s to 9.4 s, and doing both together gives 18.8 s.

What is the connection to filters?

The same pair is a low-pass filter with cutoff f_c = 1/(2πRC). A long time constant means a low cutoff, so the 4.7 s circuit above passes only signals below 0.034 Hz and smooths everything faster away.

Understand the result from RC Circuit Calculator

Compare another tool, review the underlying idea, then solve a fresh problem without copying the example.

Calculators related to RC Circuit Calculator

See all calculators →

Graphing calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Scientific calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Four-function calculator

Explore this resource with editable values, visible working, and a result you can check.

Open free tool

Understand mathematical modeling behind this calculator

A calculator can check the arithmetic; use the mathematical modeling subject guide to rebuild the method, mathematical modeling practice questions to test selection, and the math formula library to confirm conditions and notation.